Phone: 650-961-5900
FAX: 650-323-9237
FAX: 650-323-9237
E-Mail: bsiegal@thermengr.com
|
Phone: 650-961-5900
FAX: 650-323-9237 E-Mail: bsiegal@thermengr.com
|
| The WT-100
Forced Convection (Moving Air) Wind Tunnel is designed in accordance
with the EIA/JEDEC JESD51-6 standard for thermal characterization of semiconductor
packages and devices. The vertical design minimizes laboratory floor space
requiements. Air is drawn in at the bottom and exhausts at the top. The
test section is large enough to accommodate the largest JEDEC and SEMI
thermal test boards. Air velocity can be adjusted over the range of 0.5
to 5 m/s; air velocity is monitored with an included hot-wire anemometer
connected to a digital display. A Type-T thermocouple is mounted in the
test section for monitoring the moving air temperature.
Click here for a detailed data sheet (in ".pdf" file format) |
|
| The NC-100
Natural Convection (Still Air) Environment is designed in accordance
with the EIA/JEDEC JESD51-2 standard for thermal characterization of semiconductor
packages and devices. The one cubic foot enclosure has an internally mounted
Type-T thermocouple for monitoring enclosure temperature. Also included
is a dual 18-contact edge-card connector for accepting both JEDEC and SEMI
standard thermal test boards.
Click here for a detailed data sheet (in ".pdf" file format) |
 |